![]() Packed with 12VDC external universal power supply.DIP switch configuration for "Link Fault Signaling" and twisted-pair auto-negotiation/forced mode.Supports IEEE 802.3x Flow controls: Flow control for full duplex and back pressure for half duplex.Gigabit transmission supports 9K bytes jumbo frames.Extremely low latency (≤1.5 μs, FIFO, worst case) supports larger multi-hop networks.Auto-MDIX capability on the twisted-pair port allows convenient connection. The built-in switch and its store-and-forward switching architecture performs the network segmentation that allows the maximum fiber distance extension. Link Fault Signaling provides a means of propagating a link drop on either port of the media converter to the other port, enabling a connected managed switch to see the link drop and respond to it using Spanning Tree Protocol or another recovery scheme. Improvements in the 065-1196A series Media Converters include: extremely low latency of ≤1.5 μs, FIFO, worst case the ability to force the RJ-45 port to 100Base or 10Base full or half-duplex modes the ability to provide auto-negotiation on the 1000Base fiber port or forced full-duplex mode where required and the enabling or disabling of the Link Fault Signaling feature. The fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex legacy hub. The built-in 10/100/1000 switch enables the fiber cable connection to operate at 1000 Mbps connected to either a 10BaseT, 100BaseTX, or a 1000BaseT network, while remaining completely 1000BaseSX or 1000BaseLX standard-compliant for the fiber optic connection. Signamax Connectivity Systems' new and improved 065-1196A series 10/100/1000 Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and 1000Base Gigabit Ethernet networks.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |